Our brass chimney nozzle is unique due to its design. The chimney nozzle is used by lowering the device down a chimney while water is supplied, thereby creating an ambient mist as the chimney tool is lowered. The ambient mist extinguishes the fire quickly with little or no water damaged caused to the flute making it more efficient. The chimney nozzle has no handle and is directly attached to a water hose line.
It has a four (4) nozzle head that puts out 8 G.P.M (gallons per minute) and 8 P.S.I. (pounds per square inch). All nozzles are tested to work from 0.03 to 125 P.S.I. This nozzle is intended for use against chimney or silo fires by attaching it to any available hose types or a firefighting hose. A hose attachment reducer can be used to adapt this nozzle to any size hose.
The brass five nozzle sprinkler head provides an ambient mist. The nozzle can be used with either low or high pressure, at rates up to 125 P.S.I. This firefighting nozzle system uses 12 gallons of water per minute.
The nozzle has no moving parts and should be attached to a 1 ½” to 1 ¾’ hose or larger by using a threaded adapter. This nozzle system includes a wand hand hold attachment equipped with an on/off ball valve.
Install this brass nozzle onto a permanent water sprinkler system or use it with the wand handle with lightweight, portable firefighting equipment. This sprinkler requires minimal water pressure to operate, but as the pressure is increased more water vapor is created.
This nozzle system can be used for all class types of fires including A.B.C. or D.
It can be used as a “first response” on site for all types of fires including house, vehicle, grass, forest and building fires.
Preserve water and suppress fires with this water efficient and effective original sprinkler Nozzle. This new low to high water pressure technology rapidly puts out fires without causing excessive water damage. Unlike existing devices, the Ambient Mist technology does not require large amounts of water.
Use this economical firefighting solution on all types of fires using low water pressures. This technology can be used to replace current sprinkler systems in homes, high rise buildings, condos commercial and industrial applications. Our design will result in reduced consequential water damages and save lives with our highly efficient Ambient Mist technology. The Ambient Mist nozzles can be retrofitted to any existing sprinkler system.
This system also leaves a minimum of 5% oxygen in the air, reducing instances of death due to lack of oxygen.
The sprinkler system is designed to extinguish virtually all building combustibles, electrical fires, flammable liquids and gases with minimal water damage. This sprinkler head design extinguishes class A, B and C fires.
Furthermore, for increased efficiency, the sprinkler can be positioned at any vertical or horizontal room position such as ceiling, floor or wall levels. This system does not require gravity to work and sprinklers can be installed at any angle position.
After the fire has been suppressed, the device can be reset by turning the lever back to its closed position and inserting a new frangible bulb into the sleeve.
*All Fire fighting nozzles include an integral water filtering system.
With other fire suppression sprinkler systems, most fires big or small require massive amounts of water at high pressure to extinguish them. These systems cause unwanted water damage.
Ambient Mist firefighting nozzles reduce water damage by generally using greatly reduced amounts of water at lower pressures and can work on all types and classes of fire.